5 Steps In Making Homemade Solar System

1) Conduct a comprehensive energy audit – Before using a residential project of solar energy to begin, you should do an energy audit of their homes to find out how and where power is used in your household. They want to know how much energy is used each month, so you can customize a design of solar energy to meet your needs.

In conducting an audit of energy, you will also discover leaks energy at home, and take steps to correct it.

2) a source of cheap components - If you want to keep your budget accommodation to low solar project, you need to do the footwork to source parts and components at low prices.

You start by selecting the inventory eBay. The low cost components that you want to search for solar panels and deep cycle batteries. Spend some time through the offers and place your bid.

3) Create the solar module – If you get solar cells from eBay, they are probably not in the best conditions. You should review each single cell.

Broken cells are discarded. Cracked cells can be repaired. If you’ve sorted all the PV cells, you can start to weld them together to manufacture a solar panel.

4) The installation of solar module - In this phase, you must decide how and where you want to install solar panels. Modules can be fixed either on the roof or floor. Installing the roof is a better option because it is the sun.

5) Install the batteries – you can not connect to an electrical device directly to solar panels. Because the performance of the modules is low and inconsistent. You need to build a battery.

Solar cells are equipped with a controller, where they are used, you connect to the battery. If the battery is charged, it can be used for simple electric appliances using direct current (DC) power.

Leave a Reply